Side COF Data Connection & Test Point with Scalar Strip
V420HJ1-XRP01 Side COF and Scalar Test Points The COF data number of this panel is nt39565h-c5253a. This specific COF number is used with different panels, and I also have the scalar strip data of each panel in a single photo, so I am publishing it with the panel title. In this article, you will also find an image of this COF data in original 4k resolution, the PDF link of which I will put at the end. You can download it for free.
| Pin # | Signal / Function | Description | Test Point / Note |
|---|---|---|---|
| 1 | VGH | This voltage is used to keep the TFT gate drive in a high state, in simple terms, these voltages turn on the gate drive. | Expected: +27V |
| 2 | VGL | These voltages are used to keep the TFT in a low state, meaning these negative voltages turn off the TFT. | Expected: -7.8V |
| 3 | VDD | This power supply operates the logic circuit for the source COF and also for the internal panel. | Typical: +3.3V |
| 4 | GND | This is ground. It works everywhere in the panel’s internal circuit, including the scalar strip. | ~0V |
| 5 | STV | The function of the STV is that it generates clock pulses, which is where the scanning process begins. | 0.04V |
| 6 | CKV | CKV is a clock signal that causes the gate drive to shift the line, which is why double image faults are seen in some panels. | +1.71V |
| 7 | OE2 | OE2 This signal enables and controls the output of display data. | +1.36V |
| 8 | OE1 | OE1 This controls the secondary signal output. | +1.36V |
| U | UD | UD Its function is to control up-down scanning and it also identifies the direction of vertical scanning. | 3.3V |
| L | LR | Its function is to control the left-right horizontal shaft. | +3.3V |
| R | STVR | The STVR starts the backup line and this is the secondary start pulse signal. | 0.06V |
| V | V-COM | Common voltage flicker and screen black level setting | +7.3V |
| NC | NC | Sony LED TV Repair Center |
Note: The above COF data is tested on real panels and voltage values may vary slightly depending on the panel model.
Complete data nt39565h-c5253a
Complete data is nt39565h-c5253a for panel number V420HJ1-XRP01. In this article, we will also share COF data and scalar strip data and its test points, which will give complete information to technicians. You will also get this data in the form of a table, and we will also add our experience to it. This article is being published by Sony LED TV Repair Center Lahore. Download the image and keep it safe. The link is below.
Conclusion
V420HJ1-XRP01 Side COF and Scalar Test Points We are publishing this data to help fellow technicians. We have also created a separate pillar page for this, in which all the COF data article links will be kept. You can read the detailed article by clicking on the COF number link according to your need on this page, or you can type the COF number in the search bar and read your desired article.
Disclaimer: The information provided here about the NT39565H-C5253A is for educational and technical reference only.
Download the full high definition picture PDF here.👈
V420DK1-XRS1 COF Data Test Points
Shaukat Ali has over 30 years of experience in LED TV repair, specializing in chip-level repair work. He is an expert in Sony LED TVs, and also repairs other major brands like Samsung, TCL, Orient, and Haier. His expertise includes display panel faults, motherboard issues, power supply circuits, T-Con, and HDMI faults. Based in Lahore, he shares real-time fault finding cases from daily repair work to help technicians and learners with practical experience.
📞 Contact: +92 321 4066054