how to fix 2 blinks of klv 40v400a
The Sony LED model KLV-40W400A was brought in for repair due to a two blink error indicating a power supply issue. After checking the power supply, which was functioning correctly with accurate voltages, it was found that the twelve-volt supply was not reaching the main board due to a faulty safety resistance reading zero ohms. Replacing this resistance resolved the issue, and the television began to operate normally.
Cause of the fault :
Zero ohm resistance faulty:
Pingback: Sony-klv-32ex300-power-failure » Sony Led Tv Repair Center Lahore
I’ve been browsing on-line more than 3 hours lately, but I by no means found aany fascinating article lik yours.
It is beautiful value enough for me. Personally, iff
all site owners and bloggers made just right content material as
you probably did, the internet shall be much more helpful than ever before. http://Boyarka-inform.com/
I’ve been browsing on-line more than 3 hours lately,
but I by no means found any fascinating article like yours.
It is bbeautiful value enough for me. Personally, if all site owners and bloggers made just right content material
as you probably did, the internet shall be much more helpful than ever
before. http://Boyarka-inform.com/